Today I put some detailed thought into the 2.0 version of my synth setup. Given the minimal number of voices I typically use in each of my recordings, I really have too many VCOs right now.
The “trouble” started with the SynthTech E370 beta test. It was too large and too overkill-ish for my needs, where I formerly had the smaller E352 — but given the opportunity to test one and keep it gratis, I was not going to say no! So that was when I expanded to a second case and kept a bevy of other oscillators alongside it cover the areas where it wasn’t as strong.
Long story short, I worked it out today and found if I keep the E370, I can let go of most of my other VCOs — to be replaced by the ER-301, the tiny new Volca Modular, and a couple of my favorite software plugins. I’d keep Tides for modulation duties (the ER-301’s outputs are audio only) and provisionally keep Plaits to see if it thrives in a less choked pond. But with other consolidation, I am looking at reducing my Eurorack space from the current 460HP down to about 360HP.
There are a few ways this could go…
- Keep current Mantis and rack, just leave empty space in the rack. (Boring, but easy and cheap — and where I will start unless a surprise opportunity comes up.)
- Sell my Mantis, and buy a bigger case to unify things. (Big cases tend to be more expensive, but well within what I recover from selling the modules. It may not be as satisfying as other options though.)
- Sell my Mantis, and DIY a bigger rack or case with a second or bigger power supply. (Cheaper than 2, but once I work out issues with power, power distribution, rails etc. it’s probably not as cheap as I first thought. And it’s probably a bad idea in general.)
- Get a second Mantis. Bracket them together for a taller, unified setup. (These cases are a great value and easy to find used.)
- Keep the Mantis, but replace the rack with a Rackbrute 6U. That’s a row shorter than my rack, and optioanlly mounts onto a Minibrute 2 or 2S, which could replace my Microbrute. All of that for about the same cost of getting one big case, and it’s professional and portable. But in retrospect, I don’t actually feel like I want to upgrade the Microbrute that much…
Anyway, one step at a time: get ER-301. Learn it. Build up replacements via custom units and sampling. Sell unneeded stuff. Then figure out the case thing. Make music the whole time I’m doing it.