everybody cut fruitloose

I have been pondering minor changes in my modular rig.

First: changing from the Expert Sleepers ES-3 + ES-6 combo to the upcoming BoredBrain Optx. Less power consumption, 2 additional inputs, a single module, no DC offset on the inputs at 0V, and I free up half my Mazzatron Mult+PassThru for Minibrute connections. And the price looks to be less than or equal to what I’ll get reselling the old modules.


Second: TipTop Fold Processor goes out. The folder itself is one I don’t especially like. What is groovy about it is the sub output, which is done with a window comparator on the spiky/offset folded bits, and some dividers and a mixer. So why not ditch the folder and go for the king of comparators, Joranalogue Compare 2 — which I was wanting anyway, and which can do /2 (possibly /4 with clever patching) right on board?

(Folders I like: Intellijel uFold and Shapeshifter, Antimatter Crossfold, saw-to-sine converters like FM Aid, Warps (though it’s a bit rough in some ways), Blades, basic geometric folders like in the E52, the Arturia metalizer. “Serial”, Serge-like folders in general, I think. Folders I don’t like as much: DPO, 0-Coast, Origami, TipTop; the “parallel” Buchla-style folders generally.)

Looking at various logic module options, I figured an SR latch might be cool to have, particularly with a comparator. As it happens, you can patch one using a side of the Compare 2. So that’s a win.


Third: also while looking at those options, I happened to investigate the Klavis Mixwitch, and discovered that it’s flipping brilliant. The basic part is two 2-input mixers (A and B), the inputs normalled to +5V, invert buttons for each input, a mute button for each output, and A output normalled to mix with B. Already a super useful set of things that could replace my Stages/P-075 combo.

The even better part is that the B output can go into switch mode — which can be CV addressed or sequentially/randomly clocked, and can flip through all 4 inputs or just the two B inputs.

So this one module is a mixer, offset/attenuverter, CV source with on/off switch, transposer, signal booster, sequencer, sequential switch, random selector, flip-flop / clock divider, window comparator, AND/NAND, OR and XOR logic…


Fourth: back up to the part where I’m replacing a wavefolder. I thought about Warps (my glowing old friend) to replace it, but started poking around and… hmm, God’s Box Loose Fruit seems interesting. It’s a dual digital waveshaper with an analog crossfader built in. Something a little different here…!